Use and storage of storage batteries
Coptis is a perennial herb, rhizome yellow, often branched, most of the fibrous roots. Coptis in the name, the earliest in "Shen Nong's Materia Medica", said: "top grade, a Wang Lian." "Pharmacological" also known as "branch even". Coptis mainly medicinal plants, the country used berberine as the main raw material, developed a large number of proprietary Chinese medicines, but also developed Coptis series of cultural tourism products, such as berberine, aprotrichia stem dishes, berberine feet, bath health products Wait. Traditional Herbal Coptis,Dried Herbal Coptis,Natural Herbal Coptis,Medicine Grade Herbal Coptis Chongqing Taisun Pharmaceutical Co., Ltd. , http://www.taisuncoptis.com
2, timely and appropriate amount of electrolyte. If a battery with a rubber case is used, the electrolyte surface height is 10-15 mm from the plate, and if a battery with a plastic case is used, it is sufficient to add the liquid level to be flush with the highest line.
3, to ensure the quality of the electrolyte. The amount of electrolyte in the battery for acrobatics is limited, and it is difficult for ordinary users to control the electrolyte quality. Therefore, it is best not to formulate the electrolyte. As the use time increases, the water in the electrolyte will be continuously decomposed and evaporated. When it is found that the liquid level of the plastic shell battery is lower than the highest level, and the liquid level of the rubber shell battery is exposed, the supplementary liquid should be added in time. However, it must be noted that distilled water should be used for the replenisher, and tap water, well water, and river water that appear to be clean are not allowed. Otherwise, the life of the battery will be greatly shortened.
4. Keep the top of the battery clean. Oil, water, and dust from the inhalation of moisture can cause discharge and short circuit between the battery electrodes. Therefore, when storing, installing and using the battery, it is best to cover the top of the battery with a clean, insulated object to prevent contamination. After adding the electrolyte, you should carefully remove the liquid that has been splashed on the top of the battery.