Precautions when using the subsoiler

The advantage of the deep loosening machine is that the depth of the ploughing is consistent, deep and not turned, and it can break the bottom layer of the plough without destroying the soil ploughing layer, and can be double-worked, and the operation cost is low.

The precautions for the use of the subsoiler are as follows:

1. The subsoiler must have a special person responsible for maintenance and use, familiar with the performance of the subsoiler, understand the structure of the machine and the adjustment methods and use of each operating point.

2. Before the subsoiler works, the joint bolts of each part must be inspected, and there must be no looseness. Check the grease in each part, not enough should be added in time. Check the wear of the consumables.

3. In the deep loose operation, the distance between the deep pines should be kept consistent. The work should be kept at a constant speed.

4, the operation should be guaranteed not to loose, not loose, not dragging.

5. The operation should be checked at any time during the operation, and the machine should be cleaned up if it is blocked.

6. If abnormal noise occurs during the operation of the machine, stop the operation in time, and continue to work after the cause is resolved.

7. When the machine is working, if there is a situation of hard and strong resistance, stop the operation immediately, remove the bad condition, and then operate.

8. In order to ensure the service life of the subsoiler, it should be carried out slowly when the machine is in the soil and unearthed. Do not force it.

9. The equipment is operated for a period of time, and a comprehensive inspection should be carried out to find that the fault is repaired in time.