Overview, working principle and characteristics of the concentrator

First, the outline of the thickener

Close the underflow gate, drive at an empty load, and then feed the mine. The inside of the machine is not allowed to fall into the sundries. The bottom flow discharge gate must be flexible and equipped with a spare gate. Check the operation of the center of the concentrator and the pump of each drive. The root leakage should be treated in time, and the lubrication part should be injected in time. To maintain the safety device, the signal is in good condition.

Second, the working principle of the thickener

The concentrator or high-efficiency concentrator generally consists of a concentration tank, a truss, a transmission, a truss lifting device, a feeding device, a discharging device and a signal safety device. The main feature of the operation of the concentrator or high-efficiency concentrator is to add a certain amount of flocculant to the slurry to be concentrated, so that the ore particles in the slurry form floccules, accelerate the sedimentation speed, and thereby achieve the purpose of improving the concentration efficiency.

Third, the application of the thickener

The concentrator is suitable for the demineralization of concentrates and tailings in the concentrator, and is widely used in metallurgy, chemical, coal, non-metal ore dressing, environmental protection and other industries. The high-efficiency concentrator is not simply a settling device, but a new type of dewatering device that combines the filtration characteristics of the mud layer. It is of great significance to improve the recovery of return water and the concentration of underflow transport and to protect the environment.

Fourth, the characteristics of the thickener

The flocculating agent is added to increase the particle size of the settled solid particles, thereby accelerating the sedimentation speed; installing the inclined plate to shorten the sedimentation distance of the ore particles, increasing the settlement area; and exerting the functions of flocculation, filtration, compression and treatment of the dense phase layer of the mud deposit; Equipped with complete self-control facilities. Thoroughly remove all dirt from the concentrator to ensure safe production and concentrated products are not contaminated. Clear the upper part of the machine and the surrounding objects, and check for obstacles on the rack and the raceway. The transmission part and the lubrication parts should be in good condition and should not be allowed to run.