Large-scale silkworm rearing outdoor scaffolding in mountain areas
Germany imported beads
Imported French lens
mould Die-casting Eight edge type Revolving arm
Optional emergency power supply≥3 hours
The main features:
1)Ideal cold light effects
Using the new LED cold light source, ensure energy saving and environmental protection and long service life up to 80,000hours and more.
The temperature increase of surgeon`s head below 1℃. LED do not engender infrared ray and ultraviolet radiation, without the temperature
rise and tissue damage caused by halogen shadowless light, also it can accelerate the wound healing after surgery, and without Radiation pollution.
With color temperature constant and soft, LED is very close to the sunshine.
1) Excellent shadowless effect
Lamp with the most scientific radian and Multi point light source design, ensure better uniform illuminance. When the lamps are partially occluded,
also can achieve perfect shadowless effect.Lamp panel radius of gyration ≥182cm, the lamp can be pulled to vertical floor, convenient to any angle illumination.
2) Excellent deep lighting
It is based on modularize method by Computer Aided Design, focused to irradiating with more beams of LED. It produces the deep lighting which beams
more than 1200cm,the illumination of center up to 180,000Lux or more, and offer the color temperature that can be adjusted from 3700K to 5000K which
is close to sunshine. Absolutely, it really reflects the color of human tissue and satisfied by all kinds of operating light needs.
3) Advanced control system
The use of liquid crystal display button control, to meet the needs of the medical staff of different patients with the brightness of the operation.
It offers illuminance memory function.
It does not effect using when a single circuit or one bulb is broken.
4) Universal suspension system
Rotating arm, a new type of alloy material is made of eight edge type.
Balanced system using imported arm module, more than 5 group universal joints, every cantilever must has more than 3 joints which can be rotated in 360°,
The structure is light, easy to manipulate, accurate positioning, can provide the maximum range of regulation.The equipped with fatigue correcting unit and
fix position hand handle device, easy to fix position after long time use.
5) Modern laminar lamp
The thickest part of lamp-chimney is not more than 10cm.
The lamp-chimney is made of ABS, The handle on the central of lamp can be detachable, can take high temperature (≤ 134°C) sterilization treatment,
easily adjust, flexible fixed.
Mobile Type Operating Light,LED Examination Light,Mobile Operation LED Light,Mobile Stand Operating Light Shandong Kang'erjian Medical Technology Ltd. , http://www.operatingtable.nl
Shed site conditions and construction. Outdoor scaffolding is the best way to build scaffolding between houses and forests. East-West ventilation is convenient for north-south ventilation, and silkworm excrement is easy to dry, and winter scaffolding is naturally freeze-sterilized after silkworm rearing to reduce the source of disease. There are two types of scaffolding structures, fixed and movable. It is better to use a fixed scaffold. According to the natural terrain and the number of sericulture, the size of the scaffolding is determined, brick columns are used as pillars, and wooden sticks, bamboo rafts, etc. are used as sheds and silkworm scaffolds are used for local materials, and shed roofs are tiled. There are 3 to 4 silkworms in the scaffolds, each about 50 cm apart. Silkworm mats use sun mats, reed mats, bamboo curtains, etc., to form a row or double row silkworm frame, frame width of about 1.5 meters, to facilitate the two relative to feed the leaves and other operations. Each box of silkworm silkworm species needs about 30 square meters. The scaffolding is not walled around, and the rotten fish net can be enclosed to prevent livestock and poultry from entering.
Outdoor scaffolding for raising silkworms should pay attention to the following technical points:
First, small silkworms are kept indoors so that small silkworms develop together. After 4 or 5 instars are fed and fed one leaf, they are bred on silkworm stands. The silkworms on the same layer only put the silkworms that feed on the same batch. Generally, the silkworms that feed on the silkworms are put on the silkworm layer of the lower layer, and the silkworms on the silkworm are put on the upper layer to prevent the silkworm from contaminating the silkworm.
Second, the outdoor scaffolding generally feeds mulberry, and in summer and autumn, if no mulberry must be fed, leaves should be fed with 1 or 2 additional leaves during the day under dry conditions, and be replenished with chloramphenicol or sprayed with clean water. In the silkworm seat, to keep the mulberry leaves fresh, make the silkworm eat.
Third, do not carry out sand removal, but the next day to reduce the underlying stems, reduce the thickness of silkworm sand, silkworms to keep dry, to prevent silkworm mildew steaming fever.
Fourthly, each time the leaves are fed, the area of ​​silkworms is expanded and silkworm heads are kept even.
Fifth, the sericulture scaffolds and the surrounding environment are thoroughly decontaminated with drugs. When sericulture is conducted, the silkworm body is disinfected, and attention is paid to preventing predators such as flies, mice, and birds.
Sixth, after 10% ageing, eucalyptus was used to add food. After 12 to 13 hours, the clusters were placed in clusters.
