Daily maintenance and maintenance of multi-layer belt dryer

Every piece of mechanical maintenance is very important, because the maintenance of the machine will prolong the life of the machine and maintain good working efficiency. Let me briefly introduce how the daily maintenance and annual maintenance of the mesh belt dryer.
Daily maintenance:
1 Check the valve piping for leaks before each shift;
2 Each rotating friction part should be regularly lubricated;
2 Check whether the grounding wire of each fan and electric control box is reliable;
3 Check whether the indications of each instrument are normal, and check it regularly by the measurement department;
4 Check the machine for vibration, cracks, breakage, and corrosion;
5 Test whether each motor works normally and maintain it regularly;
6 Check the parts and fastening parts for looseness, abnormal sounds, and find out the faults in time;
7 Check some transmission mechanisms such as V-belts, chains, etc., whether the deformation is slack and wear, and adjust the chain tightness in time;
8 Check whether the electrical start and stop device are sensitive, accurate and reliable;
9 Once the various parts are damaged, they should be repaired and replaced in time.
Annual maintenance:
1 Check that all electrical devices meet safety requirements;
2 Completely remove defects and restore the original performance and effects of the equipment;
3 Replace and repair worn parts and parts that have lost performance;
4 equipment overhaul.
Whenever daily maintenance and daily maintenance should be recorded, only when the mesh belt dryer fails, can be quickly and easily repaired.