The use of spring tractor attention

The spring plowing production season is approaching, and tractors from all over the country must be put into the field for spring farming. In order to ensure safe operation of tractors in spring tillage, agricultural operators should be skilled in the following safe operation practices:

1. Before the operation in Shimoda, the farmer should carefully and comprehensively perform a comprehensive physical examination on the tractor and agricultural implements, plows, rakes, and rotary cultivators. That is, maintenance and repair, so that the technical conditions are good, into the spring farming production. To achieve high efficiency, high quality, low consumption and safety.

2. When the field operation of the tractor is transferred through a field or gutter channel, the power of the rotary cultivator shall be cut off, and then the low speed and low throttle shall be slowly passed. In the event of a tall Tianshui or a wide and deep gutter channel, it is necessary to dig low or fill the bridge in advance to confirm safety before passing to prevent the occurrence of agricultural accidents.

3. The tractor speed is slow when the farm is turning and turning the head. Do not use the walking tractor to steer the steering handle and the rear wheel pedal at the same time. Otherwise, it may cause a roll-over accident.

4. When the tractor is rotating and cultivating in the field, if the tail-wheel pedal is used to assist the steering, the steering angle should not be too large to prevent the driver's feet from colliding with the rotary ploughshare and being injured.

5. When the tractor is working in the field, if there is a car trap, do not increase the throttle. The mud under the wheels should be dug out, covered with planks or stones, and then opened.

6. If the coulter shaft of the rotary cultivator is entangled with green manure or debris from the field, it should be removed in the event of engine flameout to prevent accidents.

EVECRYO cold therapy machine Accessories, include connector, connecting pipe, cooler, cuffs, air pump and so on. each cooler can use with 9 different cuffs, the air pump is optional.

THERMOWRAP Electric Heating Pad accessories include heating brace, heating pad, adapter, temperature controller and so on. 

All of them can be ordered separately.


Accessories

Cold Therapy System Accessory, Pulse Cold Compression Therapy System Accessory, Heating Pad Accessory, Ice Pack Accessory

Chengdu Cryo-Push Medical Technology Co., Ltd. , https://www.cryopush.com