The Cultivated Techniques of Cucumber Cultivation
Industrial Laser Distance Sensor of the IT02S & IT03M series are designed for measurements of moving targets. The LiDAR distance sensor is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 3 centimeters and as far as 15 meters! The LiDAR laser sensor is widely used in many innovative applications on the market, including smart dustbin, unmanned supermarket etc.long distance control system.
Application areas of the sensor are:
> Black surface can be up to 8m
Industrial 100Hz LiDAR Solutions Industrial Lidar Sensor,Tof Laser Measurement Module,Tof Sensors,Time Of Flight Distance Sensor Chengdu JRT Meter Technology Co., Ltd , https://www.jrt-measure.com
1. In the plant growth point close to the roof, the bottom of the plant leafless vines more than 30 cm away from the ground when the timely fall vines, vines should be selected after the sunny afternoon, so easy to damage the vine. Remember not to drop in the morning with high water content, morning or after watering, so as not to damage the stem, affecting the normal growth of the plant.
2. It is best not to water for 7 days before falling, which will help reduce the water content of the vine tissue, enhance flexibility, and reduce the source of disease.
3. Remove the disease and old leaves first and bring it to the outside of the shed to burn it. Avoid the fruits and leaves that are close to the ground after the fall of vines.
4. Wrap the slings wrapped around the vines and let the stems fall to the ground. Do not pull the hard shank hard. The stems must be coiled in the same direction on both sides of the cultivating ridge. When winding the stems, bend the vines along the vines and do not bend or bend them in the opposite direction to avoid cracking or breaking the stems in the opposite direction. When the vines begin to spread, the vines are fine, the interval is short, the circle is small, the vines are thick, and the vines are separated by a long time interval. 4.
5. The leaves and stems were kept at a distance of about 13 cm from the ridge, and each plant maintained more than 20 functional leaves.
> Harsh environments, like outdoors in strong sunlight
> UAV/Drone Systems
> Intelligent Parking
> Smart Measure Systems
> Intelligent toilet
