Analysis of Causes of Engine Linkage Bolt Breaking

Broken engine connecting rod bolts can easily cause slamming and burning of tiles. In order to prevent accidents, the technical standards and operating specifications must be strictly observed during assembly, check the tightening of the connecting rod bolts within the specified maintenance cycle, and find that loosening is tightened with standard torque. The main causes are as follows: 1. The connecting rod journal and tile clearance are too large, and they collide with each other during the movement, and the connecting rod bolt is broken by a relatively large force. 2 The internal bolts of the connecting rod have not been found and are still used. They are easily broken. If the connecting rod bolt is found to be buckled, buckled and lengthened, it should be replaced in time. 3. If the tightening torque of the connecting rod bolt is too large, the assembly stress exceeds the limit, or the tightening torque is too small, loosening during operation, and knocking, the connecting rod bolts are likely to be broken. 4 casually replaced with defective bolts, or connecting rod bolt material is not good, rough processing, can not withstand the standard torque and deformation or cracks, under the impact of the impact of stress concentration and break. 5. The locking device for the connecting rod bolts and nuts will lose its function. Loosening during operation will also cause the connecting rod bolts to break. 6. "Speeding" failed to take emergency measures in time to make the connecting rod bolts overloaded and broken. 7. The connecting rod bolts are not tightened according to the specified torque, forming a tight one, loose one and easily broken.

Enzymes have been widely used in brewing industry, which brings huge advantages in adjunct flexibility, malt enhancement, wort filtration, fermentation degree, beer maturation, quality and stability during shelf life. Sunson offers the following products:  

  • High-temperature α- amylase ,  pullulanase, glucoamylase and maltogenic amylase for adjunct liquefaction, extract yield increase, sugar profile modification and fermentation degree improvement;  
  • Glucanase, xylanase , neutral Protease and complex enzymes for mashing to improve extract yield and ease wort filtration. 
  • Beer maturation enzyme
  • Specific endopeptidase for beer haze prevention


Beer Enzymes

Brewing Enzymes,adjunct liquefaction,mashing,stability

Sunson Industry Group Co., Ltd , https://www.sunsonchinaenzymes.com