Corn Combine Operating Procedures
Corn Combine Harvester is an advanced high-tech agricultural machinery. It can complete operations such as corn picking, conveying, container collection, grain unloading and straw smashing in one-time operation. Currently, it is our focus in Shandong and even in the whole country. Promotion of agricultural machinery. In order to give full play to the performance of the corn combine harvester, improve productivity, and ensure safety, operators must not only understand the structural principles of the machine, but also must master the proper operating procedures. 1. The crew pilot must be trained and learned through the operation of the corn harvester, with the driver's license and field work experience issued by the agricultural authority. 2. The used corn harvester must be thoroughly overhauled and maintained. The tractor that is used with the combine harvester must pass the annual review of the Agricultural Machinery Supervision Department and the technology is in good condition. 3. Before the engine starts, the shift lever and power output lever must be placed in the neutral position. 4. Start the engine and check whether the hydraulic lifting system of the tractor is normal; whether the operating mechanism, indicating signs, instruments, lighting, etc. are normal; then slowly connect the power, check whether the moving parts of the harvester are normal, whether there is abnormal sound and so on. 5. When the tractor starts, turns, and reverses, it must first horn to observe the condition of the crew around and around, and remind the redundant personnel to leave. 6. When walking or transporting for a long distance, it is necessary to cut off the power of the harvester, drive at a medium speed, and the crew members are not permitted to sit on anyone except one driver. 7. Before entering the plot, the driver must understand the basic conditions of the land to be cut, such as the terrain, species, spacing, maturity, lodging, whether there are wood piles, stones, ridges, and ditch in the land. Is it possible? Place where the car is trapped, etc. If it is necessary to artificially clear the road, clear the ground, and remove the ear of corn, advance it. 8. After entering the ground, the implement shall be tested and the engine shall be stabilized at the normal working speed before harvesting can start. 9. During the trial cut, the low I level should be used first. If it is working properly, then the speed should be increased appropriately according to the plant height, moisture content, etc. 10. During the operation, the driver should flexibly operate the hydraulic handle so that the header and chopper can adapt to the requirements of the field and avoid the crusher hammer claws hitting the soil. The front end of the header collides with a hard object and causes damage. 11. During the operation, the driver should always observe and listen to the operating conditions of various parts of the machine. If any abnormality is found, the driver should immediately stop and extinguish and troubleshoot, and do not allow the machine to be sick. 12. During the operation, if the cooling water temperature exceeds 95°C, the radiator should be stopped and the cooling water should be replenished. However, do not open the water tank cover immediately to avoid burns on the face. Instead, open the water tank and cool water after cooling for some time. 13. When the harvester arrives at the ground, do not slow down immediately. Instead, continue to maintain high speed and advance a distance so that straw can be completely crushed. 14. Discharge food promptly to avoid overfilling the food tank and causing loss or accident. 15. It is forbidden to work after removing the shield. 16. It is forbidden for the crew to troubleshoot, remove debris, and inspect and maintain the equipment before and during its operation. When checking the faults of the moving parts such as the picking roller, the reel chain, the chopper, the chain, the sprocket, etc., it is forbidden for any personnel to rotate the transmission mechanism. 17. During the work period, drivers are prohibited from drinking alcohol, and the driver is prohibited from driving the crew under conditions of excessive fatigue, lack of sleep, and poor health. Dried Garlic,Dried Garlic Flakes,Dry Garlic Powder,Dehydrated Garlic Powder Jining Yuanheng International Trading Co.,Ltd , https://www.china-garlic-exporter.com